Being a well-established organization, we are presenting a wide range of Zinc Phosphate Primer. The entire range is processed by our experts using ultra-modern technology utilizing utmost grade chemical compounds. Offered array is passed through a series of tests to make sure that we are offering an absolutely defect-free range. These paints are made available in several specifications as per clients' needs.
Features:
Water resistance
Excellent adhesion
High quality
Specifications:
Scope | The excellent rust conversion property of zinc phosphate pigment, has been fully exploited in this primer. If blast cleaning, due to cost or inconvenience, is not possible, then this primer can be used effectively on manually cleaned surface. This has excellent resistance to salt water, splashes of acid /alkali, petroleum solvents and alcohols after a suitable top coat |
Type | Single pack. Air drying |
Temperature Resistance | 120° C dry heat |
Application | By brush or Airless spray |
Theoretical Coverage | 18 M2/ Ltr at 25 microns DFT 9 M2/ Ltr at 50 microns DFT |
Dry Film Thickness | 25 – 50 microns per coat |
% Volume Solid | 45 ± 2% |
Drying Time | Surface Dry – 1 Hours Hard Dry – 12 Hours |
Recoatability Time | 18 Hours (minimum) |
Flash Point | Not below 20° C |
Colour | Grey/Red Oxide |
Package | 20 Liters |
Storage Life | 1 year or 12 Months in original sealed container |
Finish | Matt |
Surface Preparation | If blasting is not practical, manual cleaning to St – 2 Standard should be done.. |
Overcoating | Recommended with Epilac Enamels, Coal Tar epoxy or Poly Urethane paints and Chloro Rubber paints |
Additional Information:
Being perfectly shaped and swift movement of our organization, we are instrumental in offering Phosphate Primer. This array is processed using quality-tested chemicals and advanced technology. In addition to this, our offered products are tested under the direction of quality controllers to ensure their quality attributes. These paints are extensively demanded in several industries.
Features:
Weather resistance
Purity
Long shelf life
Specifications:
Scope | A high build anticorrosive metal primer for all forms of structural steel, where for a practical or economic reason, blast cleaning is not possible. Provides a hard drying corrosion inhibiting base for conventional Hi Build Micaceous Iron Oxide protective system, Synthetic Enamels or Chlororubber paints. This is ideally suited for marine and chemical environment. |
Type Composition | Single pack. Air drying |
Composition | Zinc phosphate pigmented with modified alkyd resin. |
Temperature Resistance | 100° C dry heat |
Application | By brush or Airless spray |
Theoretical Coverage | 6 M2/ Ltr at 50 microns DFT |
Dry Film Thickness | 35 – 50 microns per coat |
% Volume Solid | 46 ± 2% |
Drying Time | Touch Dry – 1-2 Hours Hard Dry – 12 Hours |
Recoatability Time | 16 Hours |
Flash Point | Not below 35°C |
Colour | Grey / Red Oxide |
Package | 20 Liters |
Storage Life | 1 year or 12 Months in original sealed container |
Finish | Matt |
Surface Preparation | Sand blasting to Sa – 2 ½ grade. If blasting is not practical, manual cleaning to St – 2 standard should be done |
Overcoating | Can be recoated with RG High Build Micaceous Iron Oxide Paint / Synthetic Enamels / RG Chlorinated Rubber Paint. |
Additional Information: